Latest News
|NewsletterCSR has demonstrated low power Bluetooth running on its BlueCore7 chipset in a mobile phone.
It marks a necessary step in the process of bringing the technology which has become known as Bluetooth low energy to market in medical monitors.
According to CSR, when this low energy version of Bluetooth is used, in a wireless heart rate monitor for example, the monitor simply ‘advertises’ itself to the control/reader using just three frequencies (could be a mobile phone or watch) that then connects sends its very short burst of data and then switches off again.
The next big step will be the Bluetooth SIG standards group's adoption of Bluetooth low energy technology in Q1, 2009.
|
| |
|---|---|
| A | Antenova |
| B | Bluetooth |
| C | CSR |
| D | DAB radio |
| E | EDGE |
| F | Frequencies |
| G | GPS |
| H | Hotspots |
| I | iPhone |
| J | Japan |
| K | Ku band |
| L | Last 25 metres |
| M | MIMO |
| N | Near Field Comms |
| O | Ofcom |
| P | Penguin |
| Q | Qualcomm |
| R | RF |
| S | Samsung |
| T | Texas Instruments |
| U | ULP Bluetooth |
| W | WiMax |
| X | 802.11x |
| Z | ZigBee |
| Slicing and dicing the spectrum of wireless technology | |
The demonstration consisted of two ICs transferring ULP Bluetooth data packets 50 times faster than standard Bluetooth, meaning that the devices were consuming as little as 1/50th of the power. In establishing the connection, the ULP devices used 1/10th the power required by standard Bluetooth.