Arduino gets a Bluetooth Smart dev kit

Ahead of Embedded World things are getting busy on the development board front. As well as Intel apparently squeezing an x86 devkit onto an SD Card, Arduino is getting a Bluetooth Smart dev kit from Nordic Semiconductor, writes Steve Bush.

Nordic Semiconductor Bluetooth Smart dev kit

Nordic Semiconductor’s Bluetooth Smart dev kit

The SDK is compatible with a range of Arduino, ChipKIT shields that employ the nRF8001 Bluetooth Smart connectivity device.

Arduino boards use series of development modules or ‘shields’ to create prototype systems. Shields perform individual or combined hardware tasks and can be connected to Arduino-compatible boards using the standard Arduino interface format.

Shields are available from many manufacturers and fulfill tasks such as sensors, motor-driving circuitry, LCD display, Wi-Fi, Bluetooth wireless technology, and Ethernet among others.

The Bluetooth Smart SDK is a port of the existing SDK available for the nRF8001 Bluetooth Smart connectivity device. The Bluetooth Smart SDK is available as a repository on GitHub where subscribers can fork their own versions and make pull requests and contribute to further improve and expand the SDK.

The software interface for the Bluetooth Smart SDK has been implemented on a number of microcontroller platforms such as ChipKIT, Maple, Teensy and mbed.

The Bluetooth Smart SDK is complemented by the Bluetooth Smart BLE Arduino shield from Red Bear Lab. The BLE shield board complies to the Arduino form factor and contains all necessary circuitry to enable an Arduino project to start communicating with Bluetooth Smart Ready products such as an iPhone 4S or later, smartphones using Android 4.3 or later, OS X Mountain Lion and later, as well as Windows 8 and later.

“Arduino is not confined to start-ups and is also used as a means of rapidly prototyping ideas at a number of large organizations. With this SDK for Bluetooth Smart, Nordic is supporting the Arduino community in their development efforts with exciting new technology,” said Bonnerud.

Bluetooth Special Interest Group (SIG) has announced an update to the Bluetooth Smart specification which will now include increased co-existence support for LTE and avoiding near-band interference.

Steve Bush

STMicroelectronics STM32 Nucleo Development Board

STMicroelectronics STM32 Nucleo Development Board

While we are on the topic of Arduino boards, we’re reporting today that STMicroelectronics has chosen to include an Arduino interface in its latest mbed-enable prototyping boards for the STM32 ARM Cortex-M series of microcontrollers.

Richard Wilson writes:

Called STM32 Nucleo the boards also incorporate ST’s own Morpho extension headers which give access to all of the microcontroller’s on-chip peripherals.

As this is an mbed-enabled board, developers can make use of the ARM-driven mbed open source software platform, online tools and collaboration infrastructure at

Read the full story »

See alsoCSR devkit speeds Bluetooth Smart development

See alsoWhat is… a GATT Service?



Leave a Reply

Your email address will not be published. Required fields are marked *