The official ElectronicsWeekly.com website blog, highlighting new features, content, and initiatives on the site.
Weird & Wireless: CFL, LED, and the incandescent bulb
I keep hearing about CFL and LED. What’s the difference between these types of light technology and the classic incandescent bulb? Which is the best?
Of course, in today’s world, we are all being encouraged to discard those ancient incandescent bulbs for the new compact fluorescent lamps (CFL) and light emitting diodes (LED), which for most of us seem really expensive to buy.
I admit that I never really liked the traditional tube fluorescent lights, probably because first, I always have trouble getting the bulbs in – it seems that I always have them out of alignment and second, I usually buy cheap lights that have ballasts that go bad. But I must admit, now that I’ve started using the screw in CFLs (like the one pictured), I’ve had quite a change of heart.
Nonetheless, I know that someday I will make the switch as they all will become clear with the obligatory advancement of technology.Recently I set out to compare our friends, the CFL and the classic incandescent.
The following two tables illustrate the characteristics for a range of incandescent bulbs from 25 watts to 200 watts and a range of CFLs from 5 to 40 watts. Assuming you turned on each light and left it on for a full year, how much would it cost, including bulb replacement and electricity?
As you can see, the lumens per watt increases as wattage increases for both types of bulbs. In addition, notice that the lumens per watt or luminous efficacy value is 6 to 8 times greater for CFLs than their incandescent brethren and they last twice as long. As such, even though a CFL costs 5 to 6 times more than an incandescent bulb in the store, the loaded cost per year of a CFL is still about 20% of an equivalent incandescent.
Of course that looks good on paper (or on a screen), but what does it mean in real life? In 2008 my house had about 90 incandescent lights totaling 6750 watts. At a 6% duty cycle, I used a total of 3,544 kWh on lights at a cost of about $373 (don’t ask me how I know this – just accept the fact that we engineers like data). Anyway, these 6,750 watts put out about 61,875 lumens.
Using the equivalent light in CFLs, I figure I would need only about 955 watts of CFLs to get the same light. At the same duty cycle this would be only 501 kWh at a cost of $53 – an annual savings of $320.
Note that replacing all 90 bulbs at $3 each would cost only $270. I think I had better get started.
Previous Weird & Wireless:
- Weird & Wireless: Differences between lumens, lux, candelas and watts
- Weird & Wireless: “Line of Site” changing closer to the receiver
- Weird & Wireless: Passive antennas and gain
- Weird & Wireless: What happens when an RF hits an obstacle?
- Weird & Wireless: RF “Line of Sight”
- Weird & Wireless: Signals getting weaker in free space
- Weird & Wireless: Why don’t wireless transmissions go on forever?
- Weird & Wireless: Adding wind power to your home
- Weird & Wireless: Why do mobile phones cause noise on my office speaker phone?
- Weird & Wireless: Does unplugging all your wall-warts really matter?
- Weird & Wireless: How did we end up with a kilowatt-hour?
- Weird & Wireless: Why is the use of cell phones discouraged around petrol pumps?
- Weird & Wireless: What is the difference between a human eye and an antenna?
- Weird & Wireless: What’s the deal with electronics and radios on airplanes?
- Weird & Wireless: Can batteries be left out in the cold?
- Weird & Wireless: GPS, and how do those satellites know where I am?
- Weird & Wireless: Do microwave ovens cause cancer?
- Weird & Wireless: Why can I use a 2. 4-GHz phone and 802.11 network at the same time?
Joel Young, VP of Research and Development and CTO at Digi International, has more than 22 years of experience in developing and managing data and voice communications. He joined Digi International in June 2000 and in his current role he is responsible for research and development of all of Digi’s core products.
Prior to joining Digi, Joel was VP of Sales & Marketing at Transcrypt International where he was responsible for sales, marketing, and product development for all information security products. During his tenure at Transcrypt, he also served as VP of Product Development and VP of Engineering where he was responsible for engineering, research and product development for wireless communications products, cellular telephony, wireline telephony and land mobile radio, data security and specialized digital radio products.
He also served as District Manager for AT&T Business Communications Services where he was responsible for the creation and implementation of voice processing and network database strategies, including deploying new voice processing platforms into the AT&T switched network for private network and other outbound calling services.