The official ElectronicsWeekly.com website blog, highlighting new features, content, and initiatives on the site.
Weird & Wireless: Signals getting weaker in free space
I get the inverse square law, but how does frequency factor into the mix when it comes to a signal getting weaker in free space?
In a previous blog we discussed the impact of the inverse square law on an isotropic transmitter. As such we came up with the observed power per unit area was related to the inverse-square of the distance from the transmitter, commensurate with the surface area of a sphere, or 1 / 4?r2, where r is the distance.
The problem here is that we are told that lower frequency (or longer wavelength) signals “go farther” in free space than higher frequency (or shorter wavelength) signals. This inverse square law says nothing about wavelength or frequency.
So what gives?
So, when we visualize our isotropic transmitter, we think of the wave coming out of a point a radiating equally in all directions or a sphere. On the flip side, we should think of our isotropic receiver the same way, as a point which is “listening” equally in all directions, also a spherical pattern.
Now, going back to basic geometry, we know that the intersection of two spheres is a circle. Hence we define this circle as the opening or aperture by which the transmitted wave is captured.
Next is the hard part from a visualization perspective. In our ideal, isotropic receiver, the opening or aperture should be perfectly sized for the wavelength we are receiving.
Hence, since the opening is a circle, the circumference of this circle would be exactly one wavelength – commonly referred to by the Greek letter lambda (?). So for a given circumference ?, the radius of the circle is ?/2? and the area of the circle (remember ?r2) is hence ?2/4?. This is the size of the ideal catching area of our isotropic receiver.
Notice that the longer the wavelength, the bigger the net for catching the transmitted signal.
Now of course our goal should be to collect as much of the power as possible. Since our transmitted signal is spreading out, the bigger the net, the more power we can collect. When we couple them together, the power received is (?/4?r)2 times the power transmitted.
Previous Weird & Wireless:
- Weird & Wireless: Why don’t wireless transmissions go on forever?
- Weird & Wireless: Adding wind power to your home
- Weird & Wireless: Why do mobile phones cause noise on my office speaker phone?
- Weird & Wireless: Does unplugging all your wall-warts really matter?
- Weird & Wireless: How did we end up with a kilowatt-hour?
- Weird & Wireless: Why is the use of cell phones discouraged around petrol pumps?
- Weird & Wireless: What is the difference between a human eye and an antenna?
- Weird & Wireless: What’s the deal with electronics and radios on airplanes?
- Weird & Wireless: Can batteries be left out in the cold?
- Weird & Wireless: GPS, and how do those satellites know where I am?
- Weird & Wireless: Do microwave ovens cause cancer?
- Weird & Wireless: Why can I use a 2.4-GHz phone and 802.11 network at the same time?
Joel Young, VP of Research and Development and CTO at Digi International, has more than 22 years of experience in developing and managing data and voice communications. He joined Digi International in June 2000 and in his current role he is responsible for research and development of all of Digi’s core products.
Prior to joining Digi, Joel was VP of Sales & Marketing at Transcrypt International where he was responsible for sales, marketing, and product development for all information security products. During his tenure at Transcrypt, he also served as VP of Product Development and VP of Engineering where he was responsible for engineering, research and product development for wireless communications products, cellular telephony, wireline telephony and land mobile radio, data security and specialized digital radio products.
He also served as District Manager for AT&T Business Communications Services where he was responsible for the creation and implementation of voice processing and network database strategies, including deploying new voice processing platforms into the AT&T switched network for private network and other outbound calling services.