SemiLEDs tackles phosphor packaging problem

SemiLEDsSemiLEDs is sampling white light LEDs using a proprietary phosphor technology, which it says delivers “a highly uniform phosphor coating across the emitter surface, greatly increasing colour precision and uniformity”.

A feature of the technology is that it can eliminate phosphor application from the packaging process, as a result and to support use in lighting luminaires, the supplier can offer the LEDs in chip-on-board (COB) and a number of other package options.

This can include “variable-CCT single-package solutions, and greatly simplified RGBW, WWRA, WWWR or WWGR solutions to provide enhanced CRI and higher efficiency red/amber/green augmentation,” said SemiLEDs.

Designated EV-W, the LEDs are available in high-power 40-, 45-, and 53-mil low-profile vertical chips and can deliver up to 140 lm with efficacies of 130 lm/watt at 350mA, depending upon the chip bin and chosen packaging approach.

Standard CCT/CRI options range from 6,500K/70CRI to 2,700K/80CRI, and include distributions as tight as 1/4 of a standard ANSI bin. Additional customization, including specialized phosphor options, is also available.

“A traditional barrier to the availability of creative new LED packages, especially lower-profile implementations, has been the issue of phosphor application within the packaging process,” said Mark Tuttle, general manager for SemiLEDs Optoelectronics Co.

Phosphor application can not only add to processing time but also creates overspray and wastage issues which can either limit packaging options or increase costs.

“By combining our rugged vertical-metal EV-blue chips, and the proprietary ReadyWhite phosphor coating technology, SemiLEDs’ EV-W eliminates blue-leakage while delivering an impressive level of color uniformity and tight binning options for low-profile and multi-color white packaged LEDs,” said Tuttle.

Read the full news story »

Tags: phosphor

Related Tech News

Share your knowledge - Leave a comment