How to Submit Your Lousy Designs to Made by Monkeys

made-by-monkeys.jpgShow us the Best of the Worst! If you’ve had a recent run-in with a cheaply-made, inferior product, tell us about it and you could win a limited edition, high-quality, well-engineered Made by Monkeys tshirt!

Just email us at webmaster@electronicsweekly.com a photo or video of the defective product, with any witty observations you care to make — keep it short, simple, and fun. View a good example of what we mean.

We also welcome suggestions on news stories and topics you think merit a closer look by our jaundiced eye. And we’d be delighted to have you to weigh in on anything we present here, particularly when we touch on your particular areas of engineering expertise. Use our handy comments button at the bottom of each blog entry.

Related Tech News

4 Comments

  1. April 20, 2009 09:19

    Is it a fault, good question? Other RCDs don’t appear to do this and tripping an upstream RCD would seem like a fault. One advantage of the way the test was implemented was that it tested the integrity of the earth.
    Of course the test loop could have been made with multiple passes, lowering the test current below the threshold of an upstream RCD while still generating sufficient imbalance to trip itself.

  2. April 14, 2009 14:01

    Thanks Oliver. Interesting. Is it really a fault, though, if it is thoroughly testing the most likely human safety condition?

  3. April 11, 2009 09:47

    I don’t have the full details yet but I’ve just found evidence of an annoying design fault in an RCD protected mains socket. We’ve recently had the house fusebox replaced, with the result that the ringmain is now protected by a RCD. Guess what, pressing the TEST button on the socket causes the central RCD to trip. Does this mean they ACTUALLY put the test resistor and switch between LIVE and EARTH instead of merely simulating a fault by putting the test between…say…live out and neutral in?

  4. J. Hosking
    August 12, 2008 19:42

    Hi: Sorry I couldn’t send a photo, but stench doesn’t photograph very well.
    My KitchenAid refrigerator quit cooling while I was on a 3 week vacation. Model #KSRG22FKWH01. It seems that the relay switch ( a small cheaply made piece of plastic junk that was made in Mexico #4SP1101221219330 K01R) was the problem. I now am stuck with a less than 7 year old refrigerator originally costing me $1400.00, that can never be used again due to the horrendous stench caused by the completely thawed meat in the freezer. It smells so bad that the unit had to be placed outside on the patio immediately and can never be brought back into the house. We used at least 6 different products to clean the interior, ( and even removed panels) but the smell is still overwhelming and will not go away. We can’t open any of the house windows that are near the patio due to the STENCH. Obviously, if you own a KitchenAid or any other brands from that company, It is best to never go away on vacation, (or if you do, remove every bit of food from the freezer ) because there is NOTHING that KitchenAid will do to compensate you for what is now a worthless refrigerator that still looks new. I won’t go into the maggot and fly problem throughout my home that arose due to the cheaply made relay that went out, because it turns my stomach to think about it. There was similarity between our home and the movie “Amityville Horror” when we arrived home from vacation. It wasn’t a pretty sight. It’s time for the U.S. to go back to making their own products. I’d be happy to pay more for a quality product.
    Thanks,
    Judy

Share your knowledge - Leave a comment