Tech news tagged ‘PSU Products’

Ericsson offers digital control of high power modules

Ofgem has approved an industry code-of-practice designed to protect consumers during the smart meter roll-out. “With the roll-out of smart meters getting fully under way next year, it is essential that householders and businesses have confidence that meter installations are done in a fair and professional…

Read More

Vicor has web tool for configuring VI Chip modules

Vicor’s VI Chip PRM modules have been given new user-configurability capabilities, and the PRM modules can be configured for use as point-of-load buck-boost regulators or to drive VTM current multipliers and meet a broad range of PoL power requirements.

The PowerBench online tool suite allows…

Read More

Micrel PWM regulator has only 5mV output ripple

Micrel has a family of 4MHz pulse wave modulation (PWM) 6A/3A synchronous buck regulators, which are designed to produce just 5mV of output ripple in full PWM mode.

The MIC23603/303 regulators combine a low-loss proprietary power mosfet with a patented constant on-time DC-to-DC switching…

Read More

Vicor adds I2C and ups current of ZVS regulators

Vicor recently added to its PI33xx Picor Cool-Power ZVS buck regulator product line for point of load DC-DC regulation.

This product line extension includes higher current devices and optional I2C fault telemetry and programmability.

The PI33xx products are designed to convert 8V to 36V inputs to high current…

Read More

Power One AC-DC supply has 18W/in3 power density

Altera details 0.35µm CPLD Richard Wilson Altera continues to up the technology specifications in the complex programmable logic (CPLD) market with details of its first 0.35µm four layer metal device, which it claims will support densities up to 250,000 gates. While admitting that the large…

Read More

CUI 5-25W ac-dc supplies are encapsulated

Altera details 0.35µm CPLD Richard Wilson Altera continues to up the technology specifications in the complex programmable logic (CPLD) market with details of its first 0.35µm four layer metal device, which it claims will support densities up to 250,000 gates. While admitting that the large…

Read More

HiTek Power 10kW supplies for high voltages

HiTek Power has added to its range of 10kW high voltage power supplies with new input voltages.

The standard input voltage of the series OLS10K (single output configuration) and series OLS10KD (dual output configuration) is 208Vac; the series OLS10KC and OLS10KDC model variants offer 380Vac input voltage.

Designed primarily for…

Read More

Linear has triple-supply power controller 2.5-36V

Linear Technology has introduced a triple-supply prioritised controller for 2.5V to 36V systems.

The controller selects the highest priority valid supply among three inputs to power the load. Priority is defined by pin assignment, while a supply is considered valid after it has been inside a voltage window…

Read More

XP 60W AC-DC supply is convection cooled

XP Power’s ECP60 series of 60W AC-DC power supplies typically have 88% efficiency.

The 101.6 x 50.8 x 30.4 mm footprint is industry standard.

The no-load power consumption is specified at less than 0.5W.

There are eight models in the range offering a…

Read More

Peak 60W AC-DC supply has 0.5W standby

Peak Electronics has added a 60W unit to its AC-DC power supply range.

The PPM60 module can be selected to deliver an output voltage of 5V, 9V, 12V, 15V, 24V and 48Vdc.

Dependent on the output voltage, the 60W module type has a top-end efficiency of up to…

Read More