TDK-Lambda on stand F30 will have its latest range of half-brick DC-DC converters offering an input range of 36-75V with nominal outputs from 2.5V/80A (200W), 3.3V/30A (99W), 3.3V/70A (231W), 5V/10A (50W) and 5V/60A (300W).

The iHG series has an open frame, single board construction, with up to 92.5% efficiency for operation in convection cooled environments with very low levels of airflow.

The fully regulated output voltage is trimmable over the very wide range of -50 to +100% and provides monotonic start up, even into pre biased and high capacitance loads.

Further standard features include fixed frequency operation, 1500Vdc input to output isolation, remote sense and remote on/off, latching over voltage and non-latching input under voltage, overload and over temperature protection circuitry. Options include a baseplate and latching protection circuitry.

TDK-Lambda’s iHG Series is approved to a wide range of national and international safety standards, including UL60950 (US and Canada), VDE0805 and CB scheme (IEC950). 

www.emea.tdk-lambda.com