 |
Standard Linear Guide
TI's Standard Linear guide showcases a wide range of standard analog products with features such as small packaging, performance and cost-savings, all designed to satisfy an extensive range of applications.
View guide now |
 |
TPD4E001 - A 4-Channel, High-Bandwidth ESD Protection Device
The TPD4E001 is a low-capacitance ±15-kV ESD-protection diode array designed to protect sensitive electronics attached to communication lines. Each channel consists of a pair of diodes that steer ESD current pulses to VCC or GND. The TPD4E001 protects against ESD pulses up to ±15-kV Human-Body Model (HBM), ±8-kV Contact Discharge, and ±15-kV Air-Gap Discharge, as specified in IEC 61000-4-2.
View guide now |
 |
TPD4S014 - 4 Types of ESD Protection in 1 Small Package
The TPD4S014 is a single-chip solution for USB charger port protection. This device offers low capacitance TVS type ESD clamps for the D+, D- and standard Capacitance for the ID pin. On the VBUS pin, this device can handle over-voltage protection up to 28V.
View guide now |
 |
How to Select Little Logic
TI Little Logic devices are logic-gate devices assembled in a small single-, dual-, or triple- gate package. Little Logic devices are widely used in portable equipment, such as mobile phones, MP3 players, and notebook computers. This application report discusses critical characteristics, features, and applications of TI’s newest Little Logic family and package offerings.
View guide now |
 |
5-Minute Guide
This guide provides an overview on applications, block diagrams, URLs of relevance, suggested devices and packaging information to help with design issues. It is broken out into the following nine categories to help narrow down your selection process:computing, server/storage, consumer medical, handsets, industrial automation, portable industrial, telecom, TV and Stereo and White Goods.
View guide now |
 |
Logic Selection Guide
"As the world leader in logic, Texas Instruments (TI) offers a full spectrum of logic functions and technologies ranging from the mature bipolar and bipolar complementary metal-oxide semiconductor (BiCMOS) families to the latest advanced CMOS families."
View guide now |
 |
Analog Switch Guide
The Texas Instruments (TI) signal switch product portfolio consists of digital switches, analog switches and specialty switches that provide high-performance, low-power replacements for standard bus interface devices when signal buffering (current drive).
View guide now |
 |
Understanding and Interpreting Standard- Logic Data Sheets
This application report explains each data-sheet parameter in detail, how it affects the device, and, more important, how it impacts the application.
View guide now |
 |
Translation Guide
"In today’s complex and high-performance system environment, higher levels of functional integration have led to lower power consumption CMOS process technologies operating at lower supply voltage levels. The ability to mix, match and support the simultaneous use of different operating supply voltage levels on the same circuit board has led to the need for voltage-level translation."
View guide now |
 |
SDIO, UART and Audio Tranceiver
"The TWL1200 is an 19-bit voltage translator specifically designed to seamlessly bridge the 1.8-V/2.6-V digital-switching compatibility gap between 2.6-V baseband and the TI Wi-Link-6 (WL1271/3)."
View guide now |
 |
System Level ESD Protection Guide
"Designingadvanced ESD protection structures is becoming more and more challenging with the system bus and I/O operating more often in high-speed mode."
View guide now |
 |
TPS22960 - Low Input Voltage, Dual Load Switch with Controlled Turn-on
"The TPS22960 is a small low-rON dual load switch with controlled turn on. The devices contain two P-channel MOSFETs that can operate over an input voltage range of 1.62 V to 5.5 V."
View guide now |
 |
TPD12S015 Datasheet - HDMI Companion Chip with Step-up Converter, I2C Level Shifter, and High-speed ESD Clamps
The industry’s first integrated portable HDMI companion chip with up to 75% board space savings
View guide now |
 |
TPS7A45xx - Single Output LDO, 1.5A, Adj. (1.21V to 20V), Low Noise, Fast Transient Response
TI’s New Family of TPS7A45xx Low-dropout Regulators are optimized for fast transient response, have an output voltage range from 1.21 V to 20 V and supply 1.5 A of output current with a dropout voltage of 300 mV.
View guide now |
 |
Analog & Logic Guide for Package Solutions
This comprehensive guide for package solutions outlines complete specs for analog and logic.
View guide now |
 |
I2C Guide
This I2C guide provides an updated look at I2C applications and how TI’s I/O expanders, multiplexers, buffers and repeaters can help system designers achieve effective subsystem communications using proven I2C devices.
View guide now |
 |
Download TI’s New Little Logic Guide
Find the latest Little Logic devices that meet your design requirements in TI’s new Little Logic Guide that includes the new Little Logic package options Logic technology migration and functionality tables for all TI little logic families.
View guide now |